Ru过渡层对NiCoCrAlY涂层与DD6单晶高温合金界面扩散行为的影响

针对第二代单晶高温合金DD6开展了一种具有阻扩散功能的金属防护涂层的探索性研究.采用电镀和电子束物理气相沉积(EB-PVD)方法在DD6单晶高温合金上制备了NiCoCrAlY/Ru双层结构涂层,同时采用EB-PVD在单晶合金上沉积了单层NiCoCrAlY涂层.研究结果表明,在1 050℃大气环境中扩散处理300 h后,...     

A statistical study of C IV regions in 20 Oe-stars

In this paper, using the Gauss-Rotation model (GR model), we analyse the UV C IV resonance lines in the spectra of 20 Oe-stars of different spectral subtypes, in order to detect the structure of C IV region. We study the presence and behavior of absorption clouds and analyse their characteristics. From this analysis we can calculate the values of a group of physical parameters, such as the apparent rotational and radial velocities, the random velocities of the thermal motions of the ions, the Full Width at Half Maximum (FWHM), the optical depth, as well as the absorbed energy and the column density of the independent regions of matter, which produce the main and the satellite clouds of the studied spectral lines. Finally, we present the relations between these physical parameters and the spectral subtypes of the studied stars and we give our results about the structure of the C IV region in their atmosphere.     

Mapping lunar surface chemistry: New prospects with the Chandrayaan-2 Large Area Soft X-ray Spectrometer (CLASS)

Surface chemistry of airless bodies in the solar system can be derived from remote X-ray spectral measurements from an orbiting spacecraft. X-rays from planetary surfaces are excited primarily by solar X-rays. Several experiments in the past have used this technique of X-ray fluorescence for deriving abundances of the major rock forming elements. The Chandrayaan-2 orbiter carries an X-ray fluorescence experiment named CLASS that is designed based on results from its predecessor C1XS flown on Chandrayaan-1. We discuss the new aspects of lunar science that can be potentially achieved with CLASS.     

热障涂层表面裂纹水浸超声检测

为有效检测热障涂层(TBCs)表面裂纹,进行了热障涂层表面裂纹水浸超声检测技术的应用研究。以常用的大气等离子喷涂(APS)热障涂层作为试验材料,采用水浸超声检测回波声程差和C扫描图像对不同深度、宽度和长度的热障涂层表面裂纹进行了表征。结果表明:热障涂层基体材料对热障涂层表面裂纹的检测效果无明显影响;通过优化检测参数和合理选用仪器探头,利用水浸超声方法可实现对热障涂层表面深度为0.1 mm、长度为2 mm裂纹的有效检测;水浸超声检测技术可以获得裂纹的长度、深度参数,是解决热障涂层表面裂纹检测问题的有效方法。      

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

单推力航天器交会对接轨迹规划及跟踪控制

针对单推力航天器交会对接问题，提出一种轨迹规划及跟踪算法。首先，考虑到追踪航天器只沿本体X轴安装推力器，且推力方向固定，为了实现从起始位置转移至期望位置并满足姿态要求，基于三维螺旋线设计两阶段转移轨迹，根据初末位置以及末端速度方向要求，求解螺旋线参数。该螺旋线可以保证在初末速度方向固定情况下，曲率积分最小。其次，为了降低轨迹跟踪难度并减小初始时刻的位置跟踪控制力，需要将转移轨迹初始速度与追踪星X轴重合。传统螺旋线无法满足该约束条件。本文对传统螺旋线进行改进，提出一种旋转螺旋线轨迹设计方法。通过引入姿态旋转矩阵，将螺旋线在三维空间旋转，在不改变曲线形状的前提下满足初末位置及速度方向要求。然后，为了跟踪转移轨迹以及跟踪期望推力方向，提出基于CLF（Control Lyapunov Function）的滑模控制策略，当追踪星X轴与期望推力方向夹角较大时，采用CLF，保证最优性；当姿态误差收敛至滑模面附近时，切换为滑模控制，以提升系统鲁棒性。最后，通过仿真验证旋转螺旋线相比于传统螺旋线的优势。     

基于IRI-2012模型广州地区f_0F_2实测与预测的对比分析

利用广州台站(23.2°N,113.3°E)的实测数据和IRI-2012模型提供的预测数据,对比分析了2013年广州地区f_0F2的变化特征.结果表明,IRI-2012模型能够较好预测该地区f_0F_2的变化趋势,并且CCIR参数得到的预测值比URSI参数更接近实测值;预测值与实测值存在系统偏差,在11:00 LT-06:00 LT时段,观测值均比预测值大,其他时段则相反.在日落后至午夜前时段,预测值与实测值有较大差距.绝对偏差的极值点通常出现在20:00 LT左右,最大超过4 MHz.相对偏差变化比较明显的时段是午夜后至凌晨;在02:00 LT或04:00 LT及06:00 LT附近,可能会出现双误差峰值点,最大超过0.4;但在σ变化很大的20:00 LT附近,相对偏差却变化不大.夜间增强现象会使得偏差增大,导致预测值不能很好反映实测f_0F2的变化.     

含氢 WC/ C 复合涂层在不同润滑油环境的摩擦性能

利用非平衡磁控溅射技术,通过同时离化乙炔气体和共溅射石墨靶与碳化钨靶,在304不锈钢和单晶硅基底上沉积具有Cr过渡层和WC过渡层的含氢WC/C复合涂层。采用扫描电镜、Raman光谱仪、X射线衍射仪、纳米压痕仪等对涂层的微观结构、力学性能进行分析。利用Rtec摩擦磨损试验机对WC/C复合涂层与304不锈钢基底在PAO基础润滑油环境、发动机润滑油环境以及腐蚀性发动机润滑油环境进行摩擦性能测试。结果表明:涂层内含有较多类石墨sp2键,WC1-x相镶嵌在非晶碳基质中构成多相复合结构;涂层的硬度和弹性模量明显高于304不锈钢基底,且其H/E值远高于基底;与304不锈钢基底相比,在三种润滑油环境下涂层均具有较低的摩擦因数和磨损率。     

磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

大气中子诱发复杂航电系统SEE的试验评价与防护设计

研究了国外单粒子效应对航电系统影响的历史进展，介绍了航电系统单粒子效应试验评价中子辐射源、试验硬件、试验方法、试验程序及评估方法5个方面。国际航空标准根据航电系统的重要程度将其定义为A、B、C、D、E五级。为了确保A、B和C级航电系统的可靠性，提出了涉及顶层项目管理至元器件控制各个层面的防护过程，优化系统设计，以适应大...